Nitrogen-protected bright copper annealing furnace is mainly used in the non-ferrous industry, copper, copper, copper wire, copper rod and other copper materials under the protective atmosphere of the bright non-oxidation annealing. The copper material is heated in the air. Since the furnace gas contains a large amount of O2, CO2 and H2O to oxidize or even burn the surface of the copper material, the controlled atmosphere heating can greatly reduce the oxygen content in the furnace and the content of the oxidizing atmosphere. The copper material is non-oxidized or less oxidized and heated, so that the surface quality of the copper material after annealing is greatly improved, and the pickling process can be removed, which not only saves energy but also improves production efficiency. 
- Nitrogen-protected bright copper annealing furnace is mainly used in the non-ferrous industry, copper, copper, copper wire, copper rod and other copper materials under the protective atmosphere of the bright non-oxidation annealing. The copper material is heated in the air. Since the furnace gas contains a large amount of O2, CO2 and H2O to oxidize or even burn the surface of the copper material, the controlled atmosphere heating can greatly reduce the oxygen content in the furnace and the content of the oxidizing atmosphere. The copper material is non-oxidized or less oxidized and heated, so that the surface quality of the copper material after annealing is greatly improved, and the pickling process can be removed, which not only saves energy but also improves production efficiency.
Brief introduction of the structure of nitrogen-protected bright copper annealing furnace:
- The nitrogen-protected copper bright annealing furnace structure is a well type vacuum furnace structure, the outer shell is continuously sealed and welded by steel plate and section steel, the furnace lining adopts full fiber furnace lining structure, and the thermal insulation material adopts high-purity ceramic fiber material with the best thermal insulation performance, compared with ordinary silicic acid. Aluminum fiber energy saving 30%. Part of the specification bright annealing furnace adopts composite structure lining, 0.6g/cm3 ultra-light energy-saving refractory material masonry, and aluminum silicate fiber after furnace lining makes the bright annealing furnace warm and good insulation performance, gap filling insulation expansion and thermal insulation powder.
- The furnace is rolled into a circular shape by using 1Cr18Ni9Ti stainless steel plate or carbon steel plate. It is welded on both sides and tested by X-ray non-destructive testing of the inspection room. The furnace cover is insulated and water-cooled. The furnace and the furnace cover are sealed by a water-cooled vacuum rubber ring, and the furnace and the furnace body are sealed by sand grooves.
- The copper bright annealing furnace temperature control system is automatically controlled by the supporting temperature control cabinet. 30KW single zone, 75KW and 90KW are 2 zones, 150KW is zone 3 temperature control, and the furnace cover is equipped with inlet nitrogen pipe, exhaust pipe and pressure gauge. Vacuum exhaust pipe, one set of 2X rotary vane vacuum pump
| Parameter name | Unit | Model | ||||
| ZRJ3-30-6 | ZRJ3-75-6 | ZRJ3-90-6 | ZRJ3-150-6 | |||
| Rated power | KW | 30 | 75 | 90 | 150 | |
| Rated voltage | V | 380 | 380 | 380 | 380 | |
| Maximum temperature | ℃ | 650 | 650 | 650 | 650 | |
| Operating temperature | ℃ | 650 | 650 | 650 | 650 | |
| Phase number | Phase | 3 | 3 | 3 | 3 | |
|
Vacuum tank Size |
Diameter | mm | Φ500 | Φ900 | Φ900 | Φ1000 |
| Depth | mm | 650 | 1200 | 1500 | 2000 | |
| Heating element connection | Y | YY | YY | YYY | ||
| Empty furnace heating time | h | 2 | 2 | 3 | 3 | |
| Empty furnace power loss | KW | 11 | 26 | 32 | 54 | |
| Temperature control accuracy | ℃ | ±1 | ±1 | ±1 | ±1 | |
| Maximum load | Kg | 300 | 1000 | 1500 | 3000 | |
| Weight | Kg | 2000 | 3200 | 3500 | 5000 | |
Jiangsu Jiuding Industrial Furnace Technology Co., Ltd. is a young enterprise with unique ideas on the design and manufacture of industrial furnaces and heat treatment furnaces.
To provide you with equipment design, process design, suitable for your heat treatment equipment purchase plan, according to your requirement.
