Features：

- Bogie preheting furnace for forged parts is widely used for forging heating [for bar, round steel, square steel, steel plate for heat transfer, temperature compensation, blue quenching, online heating, local heating, metal material forging (such as gears, axles) Precision forging of connecting rods, bearings, etc., extrusion, hot rolling, heating before shearing, spray heating, thermal assembly, and overall quenching, annealing, tempering of metal materials.

Bogie preheting furnace for forged parts features:

- Fast heating, high production efficiency, less oxidative decarburization, saving material and forging cost

- Since the principle of medium frequency induction heating is electromagnetic induction, its heat is generated in the workpiece itself. The average worker can use the medium frequency electric furnace to carry out the continuous work of the forging task ten minutes after going to work. The professional workers do not need to burn the furnace and seal the furnace in advance. . There is no need to worry about the waste of the heated billet of the coal stove due to power outage or equipment failure. Since the heating method has a fast heating rate, the oxidation is extremely small, and at least 20-50 kg of steel raw materials are saved per ton of forgings compared with the coal burning furnace, and the material utilization rate can reach 95%. Since the heating method is uniform in heating and the temperature difference of the core watch is extremely small, the life of the forging die is greatly increased in forging, and the surface roughness of the forging is also less than 50 μm.

- Excellent working environment, improve workers' working environment and company image, no pollution, low energy consumption

- Compared with the coal stove, the medium frequency induction heating furnace will no longer be bake and smoked by the coal stove under the scorching sun, and can meet the requirements of various environmental protection departments, and at the same time establish the external image of the company and the future development of the forging industry. trend. Medium frequency induction heating is the most energy-efficient heating method in electric heating furnace. The power consumption of ton forgings heated from room temperature to 1100 °C is less than 360 degrees.

- Uniform heating, minimal temperature difference between the core and high temperature control

- The medium frequency induction heating heats up in the workpiece itself, so the heating is uniform, and the temperature difference of the core meter is extremely small. Application of temperature control system can achieve precise temperature control to improve product quality and yield.